2003 Cadillac CTS Owner's Manual - Page 83

2. Scroll through the menu by turning the knob. 3. When SETUP appears on the display, press the knob once to select it. 4. Scroll through the SETUP menu by turning the knob. 5. When CONFIGURE SWC KEYS appears on the display, press the knob once to select it. 6. Scroll through the buttons (1, 2, 3 or 4). When you reach the control you wish to program, press the knob once to select it. 7. Choose a new function for the control by scrolling through the list of available functions. 8. Once you've highlighted your choice, press the knob once to select it. The control you selected is now programmed with the function you selected. 9. Press the BACK button to exit each menu. If you desire to program another control, repeat the procedure. If your vehicle is equipped with the Navigation system, do the following: 1. Press the MAIN button located to the lower left of the display. 2. Press the multi-function button next to the Setup prompt at the right of the display. 3. Turn the TUNE/SEL knob located to the lower right of the display to scroll through the Setup menu. 4. When Program SWC appears on the display, press the knob once to select it. 5. Turn the knob to scroll through the available functions. 6. Once the function desired is highlighted, press and hold the multi-function button next to the control you wish to program (1, 2, 3 or 4). The buttons are located at the right of the display. When a control is successfully programmed, the function you selected will appear next to the number of the control at the right of the display. 7. Press the multi-function button next to the Back prompt to exit each menu. If you desire to program another control, repeat the procedure. Each function can only be used once. When you program a control with a function, that function is removed from the list of functions available. It will return to the list if you remove it from the SWC it is programmed to by programming another function to that control. 2-15