2004 Cadillac DeVille Owner's Manual - Page 125

To store the exit position for an easy exit, do the following: 1. Recall the driver position by pressing button 1, or by pressing the unlock button on the remote keyless entry transmitter 1. 2. Adjust the driver's seat and steering wheel to the desired exit positions. 3. Press and hold the EXIT button. After a brief delay, two beeps will sound through the driver's side front speaker to let you know that the position has been stored. An exit position for driver position 2 can be programmed by repeating the above steps, pressing button 2 (for driver 2) and using remote keyless entry transmitter number 2. With the vehicle in PARK (P), the exit position for the previously set driver can be recalled by pressing the EXIT button. You will hear a single beep. The mirrors and power lumbar positions will not be stored or recalled. Further programming for automatic seat and steering wheel movement can be done using the Driver Information Center (DIC). You can select or not select the following: • Automatic seat and steering wheel movement when the vehicle is unlocked with the remote keyless entry transmitter, or • automatic seat and steering wheel movement when a key is placed in the ignition. For programming information, see DIC Vehicle Personalization on page 3-70. 2-61