2007 Cadillac CTS-V Owner's Manual - Page 388

Front Turn Signal and Fog Lamps A. Turn Signal Lamp B. Fog Lamp 4. Remove the electrical connector from the bulb by lifting the two plastic clips. 5. Pull the old bulb from the bulb socket keeping the bulb straight as you pull it out. 6. Install a new bulb. 7. Reverse the steps to reinstall the lamp assembly. Taillamps, Turn Signal, Stoplamps and Sidemarker Lamps To replace a turn signal or fog lamp bulb, do the following: 1. Remove the protection shield located on the underside of the front of the vehicle by pulling out the push-pins located on the underside of the protection shield. 2. Reach up behind the front bumper area from under the vehicle to access the lamp housing. 3. Remove the bulb socket from the housing by turning the bulb socket one-quarter turn counterclockwise. A. Taillamps and Stoplamps B. Turn Signal Lamp C. Sidemarker Lamp 388