2009 Cadillac CTS Owner's Manual - Page 155

Flash-to-Pass This feature allows the high-beam headlamps to be used to signal the driver in front of you that you want to pass. Pull and hold the turn signal/multifunction lever toward you to use this feature. When this is done the following will occur: Windshield Wipers • If the headlamps are off, in low-beam or in Daytime Running Lamps (DRL) mode, the high-beam headlamps will turn on. They will stay on as long as the lever is held there. Release the lever to turn them off. The lever on the right side of the steering column operates the windshield wipers. Move the lever to one of the following positions: • For vehicles with High Intensity Discharge (HID) headlamps, the low-beam headlamps must be on to activate the high-beam headlamps. See High Intensity Discharge (HID) Lighting on page 5-58. • If the headlamps are already in high-beam mode, they will remain on high-beam. 7 (Mist): Pull the lever down and release it for a single wiping cycle. The lever will return to its original position. Hold the lever in this position for continuous wiping cycles. & (Delay): For a delayed wiping cycle. Turn the delay adjustment band to set the length of the delay. 3-9