2010 Cadillac CTS Owner's Manual - Page 26

1-20 Keys, Doors and Windows Use this setting to prevent the liftgate from opening into overhead obstructions such as a garage door or roof mounted cargo during power operation. The liftgate can still be opened fully manually. OFF: The liftgate only operates manually in this position. Manual operation of a liftgate that also has power operation requires more effort than with a standard manual liftgate. In either the MAX or the ¾ mode, the liftgate can be power opened and closed by: . The switch is located on the driver's door. The vehicle must be in P (Park) to use the power feature. The taillamps flash when the power liftgate moves. { WARNING You or others could be injured if caught in the path of the power liftgate. Make sure there is no one in the way of the liftgate as it is opening and closing. Notice: If you open the liftgate without checking for overhead obstructions such as a garage door, you could damage the liftgate or the liftgate glass. Always check to make sure the area above and behind the liftgate is clear before opening it. The power liftgate has three modes of operation. Mode selection is controlled by the interior mode switch located on the driver door. Choose the power liftgate mode by turning the dial on the switch until the indicator lines up with the desired position. The three modes are: MAX: The liftgate power opens to the full open height. 3/4: The liftgate power opens to a reduced open height that can be set by the vehicle operator in a range of approximately ¾ open to full open. Press and hold the power liftgate button & on the Remote Keyless Entry (RKE) transmitter until the liftgate starts moving. See Remote Keyless Entry (RKE) System Operation (Key Access) on page 1‑5 or Remote Keyless Entry (RKE) System Operation (Keyless Access) on page 1‑7.