2011 Cadillac Escalade EXT Owner's Manual - Page 357
2011 Cadillac Escalade EXT Manual
Page 357 highlights
Driving and Operating Torque Lock If you are parking on a hill and you do not shift the transmission into P (Park) properly, the weight of the vehicle can put too much force on the parking pawl in the transmission. It might be difficult to pull the shift lever out of P (Park). This is called torque lock. To prevent torque lock, set the parking brake and then shift into P (Park) properly before you leave the driver seat. To find out how, see Shifting Into Park on page 9‑36. When you are ready to drive, move the shift lever out of P (Park) before releasing the parking brake. If torque lock does occur, you might need to have another vehicle push yours a little uphill to take some of the pressure from the parking pawl in the transmission. Then you should be able to pull the shift lever out of P (Park). 9-37 Shifting Out of Park This vehicle is equipped with an electronic shift lock release system. The shift lock release is designed to: . To shift out of P (Park) use the following: 1. Apply the brake pedal. 2. Move the shift lever to the desired position. If you still are unable to shift out of P (Park): 1. Ease the pressure on the shift lever. 2. While holding down the brake pedal, press the shift lever all the way into P (Park). 3. Move the shift lever to the desired position. If you are still having a problem shifting, then have the vehicle serviced soon. Prevent ignition key removal unless the shift lever is in P (Park) with the shift lever button fully released. Prevent movement of the shift lever out of P (Park), unless the ignition is in ON/RUN or ACC/ ACCESSORY and the regular brake pedal is applied. . The shift lock release is always functional except in the case of an uncharged or low voltage (less than 9 volt) battery. If the vehicle has an uncharged battery or a battery with low voltage, try charging or jump starting the battery. See Jump Starting on page 10‑82 for more information.