2013 Cadillac Escalade Owner Manual - Page 436

10-68 Vehicle Care 14. Disconnect the air only hose (F) from the tire valve stem, by turning it counterclockwise, and replace the tire valve stem cap. 15. Replace the air only hose (F) and the power plug (C) back in its original location. 16. Place the equipment in the original storage location in the vehicle. 2. Pull the air only hose (F) from the tire sealant canister (B). 3. Unwrap the sealant/air hose (G) from the compressor (A). 11. Inflate the tire to the recommended inflation pressure using the pressure gauge (E). The recommended inflation pressure can be found on the Tire and Loading Information label. See Tire Pressure on page 10‑47. The pressure gauge (E) may read higher than the actual tire pressure while the compressor is on. Turn the compressor off to get an accurate reading. The compressor may be turned on/ off until the correct pressure is reached. 12. Press the on/off button (D) to turn the tire sealant and compressor kit off. Be careful while handling the tire sealant and compressor kit as it could be warm after usage. 13. Unplug the power plug (C) from the accessory power outlet in the vehicle. Removal and Installation of the Sealant Canister To remove the sealant canister: 4. Turn the tire sealant canister (B) so the inflator filling hose is aligned with the slot in the compressor. 1. Unlock the air only hose (F) from the tire sealant canister (B) by pulling up on the lever. 5. Lift the tire sealant canister (B) from the compressor and replace with a new sealant canister. See your dealer for more information.