2013 Cadillac Escalade Owner Manual - Page 437

Vehicle Care To install a new sealant canister: 1. Align the sealant/air hose (G) with the slot in the air compressor. 2. Push the tire sealant canister (B) down and turn it clockwise. 3. Wrap the sealant/air hose (G) around the air compressor channel to stow it in its original location. 4. Push the air only hose (F) onto the sealant canister inlet and push the lever down. To access the tire sealant and compressor kit: 10-69 2. Locate the tire sealant and compressor kit. 1. Remove the tray by pulling up on the finger depression to access the tire sealant and compressor kit. 3. Remove the sealant and compressor kit by pulling the velcro strip up and back. 4. Remove the sealant and compressor kit from its plastic tray assembly. To store the tire sealant and compressor kit, reverse the steps. Storing the Tire Sealant and Compressor Kit The tire sealant and compressor kit is located under the storage tray on the driver side trim panel (over the rear wheelhouse).