2014 Cadillac CTS Owner Manual - Page 163

Instruments and Controls 5-41 Ride Control System Messages ALL WHEEL DRIVE OFF If the vehicle has the All-Wheel Drive (AWD) system, this message displays when there is a temporary condition making the AWD system unavailable. The vehicle will run in 2WD. This could be caused by: ... SERVICE ALL WHEEL DRIVE This message displays if a problem occurs with the All-Wheel Drive (AWD) system. The vehicle will run in 2WD. This could be caused by: ... notice that the effort required to steer the vehicle increases or feels heavier, but you will still be able to steer the vehicle. See Steering on page 9-4. An electronics problem An AWD system oil overheat Worn out or overheated clutch plates Various electrical issues SERVICE STABILITRAK This message displays if there has been a problem detected with the StabiliTrak® system. The TCS/ StabiliTrak warning light on the instrument cluster also comes on. If this message comes on while you are driving, pull off the road as soon as possible and stop carefully. Try resetting the system by turning the ignition off then back on. If this message still stays on or comes back on again while you are driving, the vehicle needs service. Have the StabiliTrak system inspected by your dealer as soon as possible. See Traction Control/Electronic Stability Control on page 9-38. Loss of wheel or vehicle speed AWD system overheat Certain vehicle electrical conditions . This message turns off when the above conditions are no longer present and the warning message is reset. To reset the warning message, turn the ignition off and then back on again after 30 seconds. If the message stays on, see your dealer right away. See All-Wheel Drive on page 9-33. If this message appears, stop as soon as possible and turn off the ignition for 30 seconds. Restart the vehicle and check for the message on the DIC display. If the message still displays or appears again when you begin driving, the system needs service. See your dealer right away. SERVICE POWER STEERING This message displays if a problem is detected with the speed variable assist steering system. When this message is displayed, you may