2015 Cadillac Escalade ESV Owner Manual - Page 187

6-4 Lighting to pass. It works even if the headlamps are in the automatic position. To use it, pull the turn signal lever toward you, then release it. If the headlamps are in the automatic position or on low beam, the high-beam headlamps will turn on. They will stay on as long as you hold the lever toward you. The high-beam indicator on the instrument cluster will come on. Release the lever to return to normal operation. . Headlamp High/ Low-Beam Changer $ (Headlamp High/Low-Beam Changer): Push the turn signal lever toward the instrument panel to change the headlamps from low to high beam. Pull the turn signal lever toward you and release it to return to low-beam headlamps. The exterior lamp control is in AUTO. The transmission is not in P (Park). The light sensor determines it is daytime. . . When the DRL system is on, only the DRL are on. The taillamps, sidemarker lamps, instrument panel lights, and other lamps will not be on. When it begins to get dark, the automatic headlamp system switches from DRL to the headlamps. To turn off the DRL, turn the exterior lamp control to the off position and then release. For vehicles first sold in Canada, off will only work when the vehicle is in P (Park). Daytime Running Lamps (DRL) When the high-beam headlamps are on, this indicator light on the instrument cluster will also be on. DRL can make it easier for others to see the front of the vehicle during the day. Fully functional DRL are required on all vehicles first sold in Canada. The DRL system comes on when the following conditions are met: . Flash-to-Pass This feature lets you use the high-beam headlamps to signal a driver in front of you that you want Automatic Headlamp System When it is dark enough outside, the automatic headlamp system turns on the headlamps at the normal The ignition is on.