1996 Chevrolet Blazer Owner's Manual - Page 285
1996 Chevrolet Blazer Manual
Page 285 highlights
7. Put the socket into the lamp assembly and turn the socket clockwiseuntil it locks in place. 8. Install the lamp assembly and screws. Front Reading Lamps 1. Use a coin or small screwdriver to unscrew the center of the overhead console lamp lens while pressing in on the lamp assembly. 9. Close the endgate. Underhood Lamp 1. Disconnect the electrical connector from the underhood lamp assembly. 2. Remove the lamp assembly from the console. 3. Remove the bulb assembly from the lamp assembly. 4. Pull the bulb straight out of the base. 5. Put a new bulb into the bulb base. 6 . Install the bulb assembly into the lamp assembly. 7. Place the lamp assembly into the console, turningit to latch it in place. 2. Remove the screws. 3. Disconnect the ground wire. 4. Remove the lamp assembly from the hood. 5. Install the new bulb. 6 . Replace the assembly. Install and tighten the screws. 7. Connect the ground wire. 8. Connect the electrical connector to the lamp assembly. 8. Install the lens. 6-37