2000 Chevrolet Corvette Owner's Manual - Page 147

3 TRIP: Use this button to display your total and trip miles, the elapsed time function, your average speed and the engine oil life. 4 OPTIONS: This button allows you to choose personal options that are available on your vehicle, depending on the options your vehicle is equipped with, such as security, door locks, easy entry seats and language. 5 E/M: Use this button to change the display between English and metric units. RESET: This button, used along with the other buttons, will reset system functions and turn off or acknowledge messages on the Driver Information Center (DIC). At the top of the DIC control buttons is a light sensor. Be sure not to block the sensor or your lighting functions may be disrupted. 1 FUEL The FUEL button displays average fuel economy and instantaneous fuel economy calculated for your specific driving conditions and range. DIC Controls and Displays Turn on the system by turning the ignition to ON. When you turn on the ignition, the DIC will be in the mode last displayed when the engine was turned off. Each DIC button allows you to scroll through a menu. A blank page ends each menu. If a problem is detected, a diagnostic message will appear on the display. Press RESET to acknowledge any current warning or service messages. The following pages will show the messages you can see on the Driver Information Center (DIC) display by pressing the DIC buttons. Press the FUEL button to display average fuel economy, such as: D AVERAGE 20.1 MPG or D AVERAGE 5.3 L/100 km 2-89