2000 Chevrolet Corvette Owner's Manual - Page 64
2000 Chevrolet Corvette Manual
Page 64 highlights
The MEMORY buttons are located on the driver's side door, above the power mirror controls. The MEMORY buttons can store and recall settings for up to three drivers. Use button "1" to store the settings for the first driver, button "2" for a second driver or press buttons 1 and 2 at the same time for a third driver. To store your memory settings: 1. Adjust your settings for the driver's seat position, outside rearview mirror positions, and telescopic steering wheel (if equipped). 2. Press and hold a MEMORY button. The light above the MEMORY button will glow steady for one second and then flash once when the settings are complete. Then the light will go off. 3. Set the climate control temperature, fan speed and mode settings, radio presets, tone, volume, playback mode (AM/FM, tape or CD), tape direction and compact disc position. Your memory settings are now programmed. Any changes that are made to the audio system and climate controls while driving are automatically stored. When first entering your vehicle, after pressing the UNLOCK button on your remote keyless entry transmitter or a MEMORY button, a recall of your settings will occur. As the memory settings are recalled, the light above the button will flash until the correct settings are achieved, then glow for five seconds when complete. A memory recall can be stopped by pressing any memory seat, mirror or steering column position button. Your memory settings can also be recalled when you press the active door UNLOCK button on the remote keyless transmitter. A memory recall can be stopped by pressing any memory seat, mirror or steering column position button. When your remote keyless entry transmitter has been programmed to driver 1, 2 or 3, and you insert the key into the ignition, memory will also occur. Drivers 1, 2 and 3 correspond to the order in which your remote keyless entry transmitters were programmed. (See "Fob Training" in the Index.) Memory recall will not work if the vehicle is moving. Memory recall will be temporarily interrupted during engine crank. 2-6