2003 Chevrolet Monte Carlo Owner's Manual - Page 291

Taillamps, Turn Signal, Stoplamps and Sidemarker Lamps 4. Unscrew the two remaining wing nuts. 5. Pull the assembly from the body carefully. 6. To remove a socket, turn it counterclockwise and pull it out. A. Rear Sidemarker Lamp B. Taillamp/Stoplamp C. Turn Signal Lamp 7. Pull the bulb out. Do not twist it. 8. Push the new bulb into the socket. 9. Push the socket back into the assembly. Tighten the socket by turning it clockwise. 1. Open the trunk. If your vehicle has a convenience net, unhook the net from the upper wing nut. 2. Remove the nut and convenience net. 10. Reinstall the assembly and the two lower wing nuts. Make sure that the wires are not pinched between the body of the vehicle and the mounting screws. 3. Pull the carpet away from the rear of the vehicle. 11. Reinstall the carpeting. 12. Reinstall the upper (convenience net) wing nut and reattach convenience net, if equipped. 5-56