2005 Chevrolet Uplander Owner's Manual - Page 258

Tips and Troubleshooting Chart Problem No power. Disc will not play. Recommended Action The ignition may not be in ACCESSORY, RUN, or RAP. The system might be off. The parental control button might have been pressed. The power indicator lights will flash. The system might be in auxiliary source mode. Press the AUX button to switch between the DVD player and the auxiliary source. The disc is upside down or is not compatible. Turn the headphones on. Make sure the correct channel is selected on the wireless headphones. Check the batteries. The volume on the headphones could be too low, adjust the volume. Make sure the wired headphones are plugged in. Adjust the volume. If RSA is on, DVD audio will not be heard. Problem No sound - Vehicle Speakers No sound - Wireless Headphones The picture is distorted during fast forward or reverse. The picture does not fill the screen. There are black borders on the top and bottom or on both sides or it looks stretched out. I ejected the disc and tried to take it out, but it was pulled back into the slot. The language in the audio or on the screen is wrong. Recommended Action If the DVD system is being heard through the vehicle speakers, adjust the volume on the radio. Press the CD AUX button on the radio to make sure that RSE is enabled. The rear speakers will mute when RSA is on. This is normal for this operation. Video mode may not be correctly set. See "RSE OSD" earlier in this section. Press the eject button once. Press the main menu button on the remote control and change the audio or language selection on the DVD menu. To change the language preference, press the display button to access the RSE OSD menu. See "RSE OSD" earlier in this section. No sound - Wired Headphones 3-108