2006 Chevrolet Avalanche Owner's Manual - Page 174

• L Windshield Washer. See Windshield Washer on page 3-10. • I Cruise Control. See Cruise Control on page 3-10. For information on the exterior lamps, see Exterior Lamps on page 3-14. An arrow on the instrument panel cluster will flash in the direction of the turn or lane change. Turn and Lane-Change Signals The turn signal has two upward (for right) and two downward (for left) positions. These positions allow you to signal a turn or a lane change. To signal a turn, move the lever all the way up or down. When the turn is finished, the lever will return automatically. To signal a lane change, just raise or lower the lever until the arrow starts to flash. Hold it there until you complete your lane change. The lever will return by itself when you release it. As you signal a turn or a lane change, if the arrows flash more quickly than normal, a signal bulb may be burned out and other drivers won't see your turn signal. If a bulb is burned out, replace it to help avoid an accident. If the arrows don't go on at all when you signal a turn, check for burned-out bulbs and a blown fuse. See Instrument Panel Fuse Block on page 5-112 and Underhood Fuse Block on page 5-115. Turn Signal On Chime If your turn signal is left on for more than 3/4 of a mile (1.2 km), a chime will sound at each flash of the turn signal and the message TURN SIGNAL ON will also appear in the DIC. See DIC Warnings and Messages on page 3-50. To turn the chime and message off, move the turn signal lever to the off position. 3-8