2006 Chevrolet Corvette Owner's Manual - Page 330

Taillamps, Turn Signal, and Stoplamps To replace a stoplamp, taillamp/turn signal bulb, do the following: 1. Remove the screw from the top of the lamp assembly. 4. Pull the bulb straight out to remove it from the socket. 5. Push the new bulb in the bulb socket until it snaps into place. 6. Reinstall the lamp assembly by first lining up the tabs on the bottom of the lamp assembly with the tabs in the vehicle, then slide it in. 7. Replace the screw at the top of the lamp assembly. Replacement Bulbs Exterior Lamp Front Parking/Turn Signal/DRL Headlamp, High-Beam Sidemarker Stoplamp/Taillamp/Turn Signal Bulb Number 5702KA H9 W3W 3057KK For replacement bulbs not listed here, contact your dealer. Windshield Replacement 2. Tilt out the lamp assembly. 3. Turn the bulb socket one-quarter turn counterclockwise and pull it out. 5-54 Keep in mind that your windshield is part of the Head-Up Display (HUD) system. If you ever have to get your windshield replaced, be sure to get one that is designed for HUD or your HUD image may look blurred or out of focus.