2006 Chevrolet Corvette Owner's Manual - Page 69

The procedure will require three ten minutes cycles to complete the matching process. Do the following: 1. The vehicle must be off. 7. Place the new, unrecognized transmitter in the glove box transmitter pocket with the buttons facing towards the passenger's side. 8. Once the transmitter is programmed, a beep will sound. The DIC will display READY FOR #X, where X can be 3 or 4, or MAX # FOBS LEARNED. 9. Press the ACC button (ignition switch). The Canadian immobilizer standard requires Canadian owners to see their GM dealer for matching new transmitters when a recognized transmitter is not available. United States owners are permitted to match a new transmitter to their vehicle when a recognized transmitter is not available. 2. Place the new, unrecognized transmitter in the glove box transmitter pocket with the buttons facing towards the passenger's side. 3. Go to the rear of the vehicle and insert the vehicle key into the key cylinder located above the license plate. See Hatch/Trunk on page 2-14 for more information on the key cylinder. 4. Open the trunk. 2-7