2006 Chevrolet SSR Pickup Owner's Manual - Page 125

S (Resume/Accelerate): Move the switch to this position to resume a set speed or to accelerate. T (Set): Press this button, located at the end of the lever, to set a speed. Resuming a Set Speed Suppose you set your cruise control at a desired speed and then apply your brakes or the clutch, if equipped. This, of course, shuts off the cruise control. But you do not need to reset it. Once you are going about 25 mph (40 km/h) or more, you can move the cruise control switch briefly from on to resume/accelerate. You will go right back up to your chosen speed and stay there. If you hold the switch at resume/accelerate, the vehicle will keep going faster until you release the switch or apply the brake. So unless you want to go faster, do not hold the switch at resume/accelerate. 9 (Off): This position turns the cruise control system off and cancels memory of a set speed. 1. Move the cruise control switch to on. 2. Get up to the speed you want. 3. Press in the set button at the end of the lever and release it. 4. Take your foot off the accelerator pedal. The accelerator pedal will not go down. The cruise light on the instrument panel cluster will illuminate when the cruise control is engaged. 3-11