2007 Chevrolet Aveo Owner's Manual - Page 313

3. Pull the front turn signal bulb socket out of the lamp housing. 4. Press the bulb inward and turn it counterclockwise to remove it from the bulb socket. 5. Install the new bulb into the socket by pressing it in and turning it clockwise. 6. Install the socket into the lamp housing by turning it clockwise. 7. Reverse Steps 1 through 4 to install the assembly. Front Turn Signal and Parking Lamps (Sedan) To replace a front turn signal or parking lamp bulb, do the following: 1. Open the hood. See Hood Release on page 274 for more information. 2. Remove the headlamp assembly. See Steps 2 through 4 under Headlamps (Hatchback) on page 310 or Headlamps (Sedan) on page 311 for instructions on how to remove the headlamp assembly. 3. Turn the front turn signal bulb socket counterclockwise. 4. Pull the front turn signal bulb socket out of the lamp housing. 5. Press the bulb inward and turn it counterclockwise to remove it from the bulb socket. 313