2007 Chevrolet Colorado Owner's Manual - Page 67

3. Tighten the lower anchor attachments and the top tether. The child restraint instructions will show you how. 4. Push and pull the child restraint in different directions to be sure it is secure. Front Seat - Regular/Extended Cab without Rear Seats Your vehicle has a right front passenger's airbag and a passenger sensing system. The passenger sensing system is designed to turn off the right front passenger's frontal airbag when an infant in a rear-facing infant seat or a small child in a forward-facing child restraint or booster seat is detected. See Securing a Child Restraint in the Right Front Seat Position on page 71 and Passenger Sensing System on page 86 for important safety information and additional information on installing a child restraint in the right front seat position. 1. See Securing a Child Restraint in the Right Front Seat Position on page 71 for instructions on installing the child restraint using the safety belts. 2. If the child restraint manufacturer's instructions recommends that the top tether be attached, attach and tighten the top tether to the top tether anchor. Refer to the child restraint instructions and the following steps: 2.1. Pull the seatback forward to access the top tether anchor. See Seatback Latches on page 16. 2.2. Pull on the finger access tab to remove the cover to access the top tether anchor. 2.3. Route the top tether according to your child restraint instructions and the following instructions: If the position you are using has a fixed head restraint and you are using a single tether, route the tether over the head restraint. 67