2008 Chevrolet Corvette Owner's Manual - Page 324
2008 Chevrolet Corvette Manual
Page 324 highlights
Notice: If the jumper cables are connected or removed in the wrong order, electrical shorting may occur and damage the vehicle. The repairs would not be covered by your warranty. Always connect and remove the jumper cables in the correct order, making sure that the cables do not touch each other or other metal. To disconnect the jumper cables from both vehicles, do the following: 1. Disconnect the black negative (−) cable from the vehicle that had the dead battery. 2. Disconnect the black negative (−) cable from the vehicle with the good battery. 3. Disconnect the red positive (+) cable from the vehicle with the good battery. 4. Disconnect the red positive (+) cable from the other vehicle. 5. Return the engine fuse block cover to its original position. 6. You may also need to initialize the power windows. See "Power Window Initialize" under Power Windows on page 2-17 for more information. Jumper Cable Removal A. Heavy, Unpainted Metal Engine Part or Remote Negative (−) Terminal B. Good Battery or Remote Positive (+) and Negative (−) Terminals C. Dead Battery or Remote Positive (+) Terminal 5-50