2008 Chevrolet Corvette Owner's Manual - Page 42

Securing a Child Restraint with a Top Tether {CAUTION: If a LATCH-type child restraint is not attached to anchors, the restraint will not be able to protect the child correctly. In a crash, the child could be seriously injured or killed. Make sure that a LATCH-type child restraint is properly installed using the anchors, or use the vehicle's safety belts to secure the restraint, following the instructions that came with that restraint, and also the instructions in this manual. 2. If the child restraint manufacturer recommends that the top tether be attached, attach and tighten the top tether to the top tether anchor, if equipped. Refer to the child restraint instructions and the following steps: 2.1. Find the top tether anchor. 2.2. Press the ribbed area of the trim cover to open the cover and expose the anchor. 2.3. Route, attach and tighten the top tether according to your child restraint instructions and the following instructions: If the position you are using has a fixed headrest or head restraint and you are using a single tether, route the tether over the headrest or head restraint. 1. Secure the child restraint using the vehicle's safety belt. See Securing a Child Restraint in the Right Front Seat Position on page 1-40. 1-38