2008 Chevrolet HHR Owner's Manual - Page 332
2008 Chevrolet HHR Manual
Page 332 highlights
Tire Sealant Read and follow the safety handling instructions on the sealant canister. The sealant can temporarily seal a puncture up to 1⁄4 inch (6 mm) in the tread area of the tire. The sealant cannot seal sidewall damage, large punctures, or a tire that has unseated from the wheel. See Roadside Assistance Program on page 7-6 if you need assistance. The sealant can only be used to seal one tire. After usage, the sealant canister and the sealant filling hose assembly must be replaced at a dealer/retailer. See Removal and Installation of Sealant Canister later in this section. Check the tire sealant expiration date on the sealant canister, if it has expired, see your dealer/retailer for a replacement. Using the Tire Sealant and Compressor Kit to Temporarily Seal a Punctured Tire Follow the directions closely for correct sealant usage. 1. Place the sealant and compressor kit on the ground and unwrap the sealant filling hose from the compressor. 2. Remove the air compressor accessory plug from the unit. To do this, pull the top portion of the wrapped cord out first, then the bottom, and then unsnap the plug. Do not insert the plug into an accessory outlet yet. 3. Remove the valve stem or tire pressure monitoring sensor cap from the flat tire by turning it counterclockwise. If an object, such as a nail, has penetrated the tire, do not remove it. 5-78
![](/manual_guide/autos/2008-chevrolet-hhr-owners-manual-a88a235/332.png)