2008 Chevrolet Suburban Owner's Manual - Page 214

Passenger Safety Belt Reminder Light Several seconds after the engine is started, a chime will sound for several seconds to remind the front passenger to buckle their safety belt. This would only occur if the passenger airbag is enabled. See Passenger Sensing System on page 1-86 for more information. The passenger safety belt light, located on the instrument panel, will come on and stay on for several seconds and then flash for several more. This chime and light are repeated if the passenger remains unbuckled and the vehicle is in motion. Airbag Readiness Light There is an airbag readiness light on the instrument panel cluster, which shows the airbag symbol. The system checks the airbag's electrical system for malfunctions. The light tells you if there is an electrical problem. The system check includes the airbag sensor, the pretensioners, the airbag modules, the wiring and the crash sensing and diagnostic module. For more information on the airbag system, see Airbag System on page 1-76. This light will come on when you start your vehicle, and it will flash for a few seconds. The light should go out and the system is ready. If the passenger's safety belt is buckled, neither the chime nor the light will come on. If the airbag readiness light stays on after you start the vehicle or comes on when you are driving, your airbag system may not work properly. Have your vehicle serviced right away. 3-40