2011 Chevrolet Cruze Owner's Manual - Page 26
2011 Chevrolet Cruze Manual
Page 26 highlights
1-20 In Brief If the vehicle came with a jack and spare tire, see If a Tire Goes Flat on page 10‑60. Resetting the Oil Life System 1. Using the DIC MENU button and thumbwheel, scroll until you reach REMAINING OIL LIFE on the DIC (oil can symbol with % sign for Canada). 2. Press the SET button to reset the oil life at 100%. When prompted, use the thumbwheel to highlight YES or NO. Press the SET/CLEAR button to confirm. Be careful not to reset the oil life display accidentally at any time other than after the oil is changed. It cannot be reset accurately. See Engine Oil Life System on page 10‑12. During cooler conditions, the low tire pressure warning light may appear when the vehicle is first started and then turn off. This may be an early indicator that the tire pressures are getting low and the tires need to be inflated to the proper pressure. The TPMS does not replace normal monthly tire maintenance. It is the driver's responsibility to maintain correct tire pressures. See Tire Pressure Monitor System on page 10‑48. Engine Oil Life System The engine oil life system calculates engine oil life based on vehicle use and displays the CHANGE ENGINE OIL SOON DIC message or Code 82 DIC message when it is necessary to change the engine oil and filter. Remember, the Oil Life display must be reset after each oil change. It will not reset itself. Also, be careful not to reset the Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the engine oil life system press the SET button while the Oil Life display is active. Tire Sealant and Compressor Kit This vehicle may come with a jack and spare tire or a tire sealant and compressor kit. The kit can be used to temporarily seal small punctures in the tread area of the tire. See Tire Sealant and Compressor Kit on page 10‑62 for complete operating information.