2006 Chrysler 300 Owner Manual SRT8 - Page 92

92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE transmitter trained will be associated with memory setting 1, and the second transmitter trained will be associated with memory setting 2. Additional transmitters will not be associated with a memory setting. Driver's Seat Glide To Exit Feature This feature provides ease of entry and exit for the driver by moving the driver's seat approximately 2-1/8 inches (55mm) rearward on exit and the same distance forward after entry, provided that the seat is not in the full rearward position. After entry, the seat will return to its previously set position after one of the following occurs: • The ignition switch is turned on • The seatbelt is fastened (the seat moves when the seat belt buckle is buckled.) This feature can be turned off by performing the following procedure: 1. Press and hold the Set (S) button on the memory seat switch (located on the driver's door panel). 2. Move the horizontal seat switch rearward. 3. Release the Set (S) button and the horizontal seat switch. During exit, the seat will move rearward from the set position when the key is removed from the ignition providing that the seat is not in the full rearward position. This feature can be turned on or off by performing the following procedure. 1. Press and hold the Set (S) button. 2. Move the horizontal seat switch rearward. 3. Release the Set (S) button and the horizontal seat switch. NOTE: The glide feature is only available on the driver's seat. NOTE: These functions can be selected at the EVIC using the Personal Settings (Customer Programmable Features). Refer to Electronic Vehicle Information Center - Personal Settings for details.