2009 Chrysler 300 Owner Manual - Page 178

176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Vary the Speed Setting There are two ways to change the set speed: • Use the accelerator pedal to adjust the vehicle to the desired speed and push the lever down ("SET/ DECEL"). • Tap the stalk up ("ACCEL") or down ("DECEL") to increase or decrease the set speed in 1 mph (1 km/h) increments respectively. Hold for 5 mph (10 km/h) increments. To Cancel The system will disable Normal cruise control without erasing the memory if: • You softly tap or depress the brake pedal. • You pull the speed control lever toward you ("CANCEL"). • The Electronic Stability Program/Traction Control System (ESP/TCS) activates. To Resume Push the lever up and release ("RESUME/ACCEL") and then remove your foot from the accelerator pedal. The EVIC will display the last set speed. To Turn Off The system will turn off and erase the set speed in memory if: • You push and release the "ON/OFF/MODE" button. • You turn off the ignition. • You switch off ESP. If the cruise control system is turned off and reactivated, the system will return to the Vehicle-to-vehicle (adaptive) distance control mode.