2009 Chrysler 300 Owner Manual - Page 413

WHAT TO DO IN EMERGENCIES 411 the instrument cluster) remains on continuously after starting the engine of the vehicle with the discharged battery. 8. When removing the jumper cables, reverse the above sequence exactly. Be careful of the moving belts and fan. steering wheel right and left to clear the area around the front wheels. Then shift back and forth between REVERSE and DRIVE. Usually, the least accelerator pedal pressure to maintain the rocking motion without spinning the wheels is most effective. NOTE: Turn OFF the Electronic Stability Program (ESP) - if equipped, or Traction Control System (TCS) - if equipped before rocking the vehicle. Refer to "Electronic Stability Program" or "Traction Control System" in Section 5. WARNING! Any procedure other than above could result in: • Personal injury caused by electrolyte squirting out the battery vent • Personal injury or property damage due to battery explosion • Damage to charging system of booster vehicle or of immobilized vehicle FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow, it can often be moved by a rocking motion. Turn your CAUTION! • When "rocking" a stuck vehicle by moving between 1st and REVERSE, do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result. (Continued) 6