2009 Chrysler 300 Owner Manual SRT8 - Page 132

130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Press and release the SET (S) button on the Memory switch, then press the side of the rocker switch labeled (2) within five seconds. The EVIC will display which memory position is being set. NOTE: • Memory profiles can be set without the vehicle in PARK, but the vehicle must be in PARK to recall a memory profile. • The Recall Memory with Remote Key Unlock feature can be enabled or disabled. Refer to "Recall Memory with Remote Key Unlock," under "Personal Settings (Customer-Programmable Features)" under "Electronic Vehicle Information Center (EVIC)" in Section 4. Linking and Unlinking the Remote Keyless Entry (RKE) Transmitter to the Memory Feature Your Remote Keyless Entry (RKE) transmitters can be programmed to recall one of two pre-programmed memory profiles by pressing the UNLOCK button on the RKE transmitter. To program your RKE transmitters, perform the following: 1. Remove the key from the ignition. 2. Select the desired memory profile 1 or 2. 3. Press and release the SET (S) button on the Memory switch, then press and release the side of the rocker switch labeled 1 or 2 accordingly. ЉMemory Profile Set" (1 or 2) will display in the EVIC. 4. Press and release the LOCK button on the RKE transmitter within 10 seconds.