2009 Chrysler 300 Owner Manual SRT8 - Page 324

322 STARTING AND OPERATING NOTE: • In Autostick௡ mode, the transmission will only shift up and down when the driver manually moves the shift lever right (D+) or left (D-). • An UPSHIFT message will appear in the Electronic Vehicle Information Center (EVIC) portion of the instrument cluster when using Autostick௡. This message appears in order to alert the driver to upshift to the next gear. The UPSHIFT message will display while operating the vehicle at higher engine revolutions per minute (RPM). You can shift in or out of the Autostick௡ mode at any time without taking your foot off the accelerator pedal. When you wish to engage Autostick௡, simply move the shift lever to the right (D+) or left (D-) while in the DRIVE position. The transmission will remain in the current gear until an upshift or downshift is chosen. When you wish to disengage Autostick௡, hold the shift lever to the right for at least one second. The transmission will now operate automatically, shifting between the five available gears. Autostickா General Information • You can start out in 1st or 2nd gear. The system will ignore attempts to upshift at too low of a vehicle speed. • The transmission will automatically downshift to 1st gear when coming to a stop. • Starting out in 2nd gear is helpful in snowy or icy conditions. • Avoid using speed control when Autostick௡ is engaged. • The transmission will not automatically shift up when maximum engine speed is reached while Autostick௡ is engaged.