2009 Chrysler Town & Country Owner Manual - Page 25
2009 Chrysler Town & Country Manual
Page 25 highlights
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 1. Perform this operation while standing outside the Alarm activated will cause the alarm to sound. Press the vehicle. UNLOCK button to deactivate the Vehicle Security Alarm. 2. Press the LOCK button on a programmed RKE transmitter for at least 4 seconds, but no longer than 10 sec- Using the Panic Alarm onds. Then, press the PANIC button while still holding To turn the Panic Alarm feature on or off, press and hold the PANIC button on the RKE transmitter for at least one the LOCK button. second and release. When the Panic Alarm is on, the 3. Release both buttons at the same time. headlights and park lights will flash, the horn will pulse 4. Test the feature while outside of the vehicle by press- on and off, and the interior lights will turn on. ing the LOCK button on the RKE transmitter with the The Panic Alarm will stay on for three minutes unless ignition switch in the LOCK position and the key reyou turn it off by pressing the PANIC button a second moved. time, or you turn the ignition switch to the ON position. 5. Repeat these steps if you want to return this feature to NOTE: When you turn off the Panic Alarm by pressing its previous setting. the PANIC button a second time, you may have to be NOTE: Pressing the LOCK button on the RKE transmit- closer to the vehicle due to the Radio Frequency (RF) ter while you are in the vehicle will activate the Vehicle noises of the system. Security Alarm. Opening a door with the Vehicle Security 2