2010 Chrysler Sebring User Guide - Page 48

WHAT TO DO IN EMERGENCIES • Set the parking brake and shift the automatic transmission into PARK. • Turn the ignition to LOCK and turn on the Hazard Warning flasher. • Block both the front and rear of the wheel diagonally opposite of the jacking position. For example, if changing the right front tire, block the left rear wheel. NOTE: Passengers should not remain in the vehicle when the vehicle is being jacked. Jacking And Tire Changing Instructions WARNING! Carefully follow these tire changing procedures to help prevent personal injury or damage to your vehicle: Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • Remove the scissors jack and lug wrench from the spare wheel as an assembly. Turn the jack screw to the left to loosen the lug wrench, and remove the wrench from the jack assembly. NOTE: The jack handle attaches to the side of the jack with two attachment points. When the jack is partially expanded, the tension between the two attachment points holds the jack handle in place. • Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground. • Assemble the jack and jacking tools. Connect the jack handle driver to the extension, then to the lug wrench. 46