2010 Chrysler Sebring User Guide Convertible - Page 14

GETTING STARTED NOTE: The convertible top must be in the UP position to access the tether anchor. • Open the access port cover behind the seat where you are placing the child restraint. The access ports to the top tether anchorages are directly behind the seat headrests under a plastic cover. • Push the tether strap and hook through the access port and down into the trunk. NOTE: Route the tether strap to provide the most direct path from the child seat to the anchor. • From inside the trunk, open the access cover on the carpet covering the back of the seat and attach the tether strap hook to the anchor. • Attach the tether strap hook of the child restraint to the anchor and remove slack in the tether strap according to the child restraint manufacturer's instructions. FRONT SEATS Recliner • Lift the recliner lever located on the outboard side of the seat, lean back and release at the desired position. WARNING! Do not ride with the seatback reclined so that the seat belt is no longer resting against your chest. In a collision, you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked. 12