2010 Chrysler Sebring User Guide Convertible - Page 24

OPERATING YOUR VEHICLE • The power top switch will operate when the ignition switch is turned to the ON or ACC position and when in the power accessory delay. Lowering • The power top switch is located on the instrument panel to the left of the steering column. • The power top switch has two top down positions which affect window position when lowering the top. • Press and hold the switch halfway down to the first detent position to lower the top and maintain the current window positions. • Press and hold the switch fully down to the second detent position to lower the top and completely lower all four windows. Raising • Press and hold the switch in the top up position until the operation of raising the top and latching is complete. "TOP DONE" will be displayed in the odometer or "CONVERTIBLE TOP COMPLETE" in the Electronic Vehicle Information Center once the convertible top is completely raised and latched. • Continue to hold the switch in the up position to completely raise all four windows. Emergency Bypass Mode (To Raise The Top Only) • This procedure is only to be used to raise the top when the top cannot be returned to the UP (raised) position by pressing the POWER TOP switch or is in a position in which the vehicle cannot be driven. Please follow these emergency bypass instructions to return the top to the UP (raised) position. • Press the POWER TOP switch in the Top Up direction five times within two seconds and hold the switch in the Top Up position for a minimum of two minutes. CAUTION! • Once this procedure has been completed and the top is in the UP (raised) position, see your authorized dealer. DO NOT exceed 40 mph (64 km/h). • Using the Emergency Bypass Mode could potentially damage the convertible top and should only be used to raise the power top to the UP (raised) position when the normal top operation is not functioning. • If damage starts to occur while in the Emergency Bypass Mode, immediately release the POWER TOP switch and see your authorized dealer. NOTE: This procedure may take more time to fully raise and close the power top. It is not uncommon to see delays of up to 30 seconds before operation begins. 22