2011 Chrysler 300 User Guide - Page 18

GETTING STARTED Memory Seats • The memory seat feature allows you to save two different driver seating positions, driver's outside mirror, adjustable brake and accelerator pedals, power tilt and telescopic steering column and radio station preset settings. The memory seat buttons are located on the driver's door panel. • Adjust all memory profile settings, press the SET (S) button then press 1 or 2 within five seconds. • Your Key Fob can be programmed to recall one of two pre-programmed memory profiles by pressing the UNLOCK button on the Key Fob. • To program your Key Fobs, perform the following: • Change the ignition to OFF. • Select desired memory profile 1 or 2. • Once the profile has been recalled, press and release the SET (S) button on the memory switch, then press and release the side of the rocker switch labeled 1 or 2 accordingly. • (1 or 2) will display in the instrument cluster if the vehicle is equipped with the EVIC. • Press and release the LOCK button on the Key Fob within 10 seconds. NOTE: Your Key Fob can be unlinked to your memory settings by pressing the SET (S) button followed by the UNLOCK button on the Key Fob in the fourth step. • Press 1 or 2 to recall the saved positions, or press UNLOCK on the programmed Key Fob. • Refer to the Owner's Manual on the DVD for further details. Manual Seat Adjustment Forward/Rearward • Lift up on the adjusting bar located at the front of the seat near the floor and release at the desired position. Recliner • Lean forward in the seat and lift the recliner lever, then lean back to the desired position and release the lever. • Lift the lever to return the seatback to an upright position. 16