2004 Dodge Intrepid Owner Manual - Page 184
2004 Dodge Intrepid Manual
Page 184 highlights
184 MAINTAINING YOUR VEHICLE Drive Shaft Universal Joints Your vehicle has four constant velocity universal joints. Periodic lubrication of these joints is not required. However, the joint boots should be inspected for external leakage or damage when other maintenance is performed. If leakage or damage is evident, replace the universal joint boot and grease immediately. Continued operation could result in failure of the universal joint due to water and dirt contamination of the grease. This would require complete replacement of the joint assembly. Body Mechanism Lubrication Body and other operating mechanisms and linkages should be inspected, cleaned, and lubricated, as required, to maintain ease of operation and to provide protection against rust and wear. Before the application of any lubricant, the parts concerned should be wiped clean to remove dust and grit; after lubricating, excess oil or grease should be removed. 3.5L Power Steering Reservoir Chassis Lubrication Front Suspension Ball Joints Inspect these ball joints whenever your vehicle is serviced. They are permanently lubricated and do not require periodic lubrication. Steering Linkage Inspect tie rod ends whenever the vehicle is serviced. They are permanently lubricated and do not require periodic lubrication.