2005 Dodge Viper Owner's Manual - Page 18

18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Program Transmitters: This feature allows you to program transmitters in case one is lost or an extra transmitter(s) is desired. Up to 4 transmitters can be programmed to your vehicle. To program another transmitter follow these steps: 1. Turn the ignition switch to the ON/RUN position and set the parking brake. 2. Using a previously programmed transmitter, press the UNLOCK button for 5 to 10 seconds. While the UNLOCK button is being pressed (after 5 seconds), press the PANIC button and release both buttons simultaneously. You will hear a chime sound to signal you that programming on the transmitter(s) may occur. 3. You may program up to 4 transmitters for your vehicle within a 30 second time limit. Press and release both LOCK and UNLOCK buttons of a new transmitter at the same time; then press and release any of the buttons once, you will hear a chime when the transmitter has been successfully programmed. A chime will sound when the 30 seconds is over, or if you turn the ignition switch OFF. 4. You must repeat step 3 for all new transmitters that will be used with this vehicle (up to 4 total). If you do not have a programmed transmitter, contact your dealer for details. General Information This transmitter complies with FCC rules part 15. Operation is subject to the following conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may be received, including interference that may cause undesired operation.