2008 Dodge Dakota Owner Manual - Page 135

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 4. Press and hold the just-trained HomeLink௡ button. If the indicator(s) blink rapidly for two seconds and then remains constant, continue with next section: Programming A Rolling Code System. NOTE: After training a HomeLink௡ channel, if the garage door does not operate with HomeLink௡ and the garage door opener was manufactured after 1995, the garage door opener may have rolling code. If so, proceed to the heading "Programming A Rolling Code System." 5. PROGRAMMING A ROLLING CODE SYSTEM At the garage door opener motor (in the garage), locate the "learn" or "training" button. This can usually be found where the hanging antenna wire is attached to the garage door opener motor (it is NOT the button normally used to open & close the door). 3 1 - Garage Door Opener 2 - Training Button 6. Firmly press and release the "learn" or "training" button. The name and color of the button may vary by manufacturer. NOTE: There are 30 seconds in which to initiate the next step after the "Learn" button has been pressed.