2008 Dodge Nitro Owner Manual - Page 22
2008 Dodge Nitro Manual
Page 22 highlights
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Features)," under "Electronic Vehicle Information Center (EVIC)" in Section 4 of this manual. • On non-EVIC equipped vehicles, perform the following steps: 1. Press the "Lock" button on a programmed (i.e. functional) key fob for at least 4 seconds, but not longer than 10 seconds. Then, press the "Panic" button while still holding the "Lock" button. 2. Release both buttons at the same time. 3. Test the feature from outside the vehicle by pressing the "Lock" button on the key fob. 4. Repeat these steps if you want to return this feature to its previous setting. NOTE: Pressing the "Lock" button on the key fob while you are inside the vehicle will activate the Security Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound. Press the "Unlock" button to deactivate the Security Alarm. Flash Lights with Lock The feature will cause the parking lights to flash when the doors are locked or unlocked with the key fob. This feature can be turned on or turned off. To change the current setting, proceed as follows: • On electronic vehicle information center (EVIC) equipped vehicles, refer to "Flash Lights with Lock," under ЉPersonal Settings (Customer Programmable Features)," under "Electronic Vehicle Information Center (EVIC)" in Section 4 of this manual. • On non-EVIC equipped vehicles, perform the following steps: