2009 Dodge Viper Owner Manual - Page 137
2009 Dodge Viper Manual
Page 137 highlights
STARTING AND OPERATING 135 Normal Starting CAUTION! The engine in your vehicle is designed for operation down to 0°F (-18°C). Starting the engine below 0°F (-18°C) creates a potential for scuffing or seizing of internal components in this very high performance engine. To prevent engine damage, do not start the engine at temperatures below 0°F (-18°C). NOTE: • You must disarm the security system in order to start the engine. For details, refer to "Security Alarm System" in Section 2 of this manual • Normal Starting of either a cold or a warm engine does not require pumping or depressing the accelerator pedal. However, if the engine has not started within three seconds, slightly depress the accelerator pedal while continuing to crank. If the engine fails to start within 15 seconds, turn the key to the OFF/LOCK position, wait five seconds, then repeat the normal starting procedure. To start the engine: 1. Fully apply the parking brake. 2. Press the clutch pedal to the floor. NOTE: The engine will not start unless the clutch pedal is pressed to the floor. 3. Place the gear selector in NEUTRAL 4. Insert the ignition key fully into the ignition switch 5. Turn the key to the ON/RUN position. 5