2011 Dodge Dakota Extended Cab User Guide - Page 36
2011 Dodge Dakota Extended Cab Manual
Page 36 highlights
UTILITY REAR CRATE 'N GO® STORAGE REAR CARGO AREA UTILITY RAILS • There are four adjustable cleats in the pick-up bed that can be used to assist in securing cargo. Each cleat must be located and tightened down in one of the detents along either rail, in order to keep cargo properly secured. TAILGATE Tailgate Removal • To simplify mounting a camper unit with an overhang, the tailgate can be removed quickly. Follow these steps: • Open the tailgate to a 45-degree angle. • The rear Crate 'n Go® storage, located under the rear seat lower cushion, consists of two removable, collapsible storage crates. • To open the crates, lift upward on the crate handles and engage the crate end flaps. • To remove the crate, press on the release lever, located on the ends of the base, and lift up on the crate. • To install the crate into the base, insert the crate into the inboard slot and push down on the outboard side of the crate, then snap into place. • To collapse the crate, push the crate end flaps inward to disengage. Push the sides inward and snap into place. • Unclip and remove the cables from the box while maintaining a 45-degree angle. • Lift the tailgate off of the pivot on the passenger side by pulling upward and rearward at the same time. • Slide the tailgate to the passenger side while making sure clearance from the box and taillight is maintained. • To reinstall the tailgate, do the following: • Slide the tailgate onto the driver's side pivot. • Hold the tailgate at a 45 degree angle and insert it into the passenger side pivot. • Clip the cables to the box. 34
![](/manual_guide/autos/Dodge-2011-Dakota-User-Guide-0c64e8/36.png)