2011 Dodge Grand Caravan Cargo Owner Manual - Page 164

162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Press and release the memory SET (S) button located Easy Entry/Exit Seat (Available With Memory Seat on the driver's door. A chime will sound signaling that ONLY) This feature provides automatic driver seat positioning to you are in the memory set mode. enhance driver mobility when entering and exiting the 4. Within five seconds, press and release MEMORY vehicle. button 1 on the driver's door. A chime will sound The distance the driver seat moves depends on where signaling to you that the driver memory has been set. you have the driver seat positioned when you remove the 5. Within five seconds, press and release the UNLOCK key from the ignition switch. button on the RKE transmitter. A chime will sound signaling to you that the RKE transmitter link has been • When you remove the key from the ignition switch, the driver seat will move about 2.4 in (60 mm) rearward if successfully disabled. the driver seat position is greater than or equal to 2.7 in To disable another RKE transmitter linked to either (67.7 mm) forward of the rear stop. The seat will return Memory Position, repeat Steps 1 to 5 for each RKE to its previously set position when you insert the key into transmitter. the ignition switch and turn it out of the LOCK position. NOTE: Once programmed, all RKE transmitters linked • When you remove the key from the ignition switch the to memory can be easily enabled or disabled at one time. driver seat will move to a position 0.3 in (7.7 mm) Refer to "Electronic Vehicle Information Center (EVIC)/ forward of the rear stop if the driver seat position is Customer-Programmable FeaturesЉ in "Understanding between 0.9 - 2.7 in (22.7 - 67.7 mm) forward of the Your Instrument Panel" for further information.