2011 Dodge Grand Caravan Cargo Owner Manual - Page 512

510 MAINTAINING YOUR VEHICLE NOTE: License Lamp • If a screwdriver is used, make sure a soft material is The license plate lamp is located under the tailgate light placed between the vehicle body and tool so not to bar and above the license plate. scratch the paint. 1. Using a small screwdriver, press inward the locking • The PRY location is best closest to the studs while tab on the outboard side of the lamp assembly and pull dislodging them separately. down on the lamp assembly for removal. 3. Twist the socket and remove from the lamp assembly. 2. Twist and remove the socket from the lamp assembly and pull the bulb out to remove. 4. Pull the bulb to remove it from the socket. 3. Push the bulb into the socket, twist the socket into the 5. Replace the bulb, reinstall the socket, and reattach the lamp assembly and reinstall the lamp assembly into place lamp assembly. ensuring the locking tab is secure. Center High-Mounted Stop Lamp (CHMSL) The CHMSL uses LED lamps that are not serviceable separately. The CHMSL must be replaced as an assembly. See your authorized dealer.