2011 Dodge Nitro User Guide - Page 56
2011 Dodge Nitro Manual
Page 56 highlights
WHAT TO DO IN EMERGENCIES • Lower the spare tire by turning the winch drive nut, located in the rear cargo area inside the vehicle, counterclockwise with the jack-handle assembly until the spare tire is on the ground with enough cable slack to allow you to pull the spare tire out from underneath the vehicle. • When the spare is clear, tilt the retainer at the end of the cable and pull it through the center of the wheel. Preparations For Jacking • Park on a firm, level surface. Avoid ice or slippery areas. • Set the parking brake and shift the automatic transmission into PARK. • Turn the ignition to LOCK and turn on the Hazard Warning flasher. • Block both the front and rear of the wheel diagonally opposite of the jacking position. For example, if changing the right front tire, block the left rear wheel. NOTE: Passengers should not remain in the vehicle when the vehicle is being jacked. Jacking And Tire Changing Instructions • Remove the spare tire, jack and tools from the stored location. • Loosen (but do not remove) the wheel lug nuts by turning them counterclockwise one turn while the wheel is still on the ground. • Assemble the jack and jacking tools. Connect the jack handle driver to the extension, then to the lug wrench. 54