2013 Dodge Durango Owner's Manual - Page 199

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 NOTE: Before programming your RKE transmitters you 3. Once the profile has been recalled, press and release the SET (S) button on the memory switch, then press must select the "Remote Linked to Memory" feature and release button (1) or (2) accordingly. "Memory through the Electronic Vehicle Information Center (EVIC), Profile Set" (1 or 2) will display in the instrument refer to "Electronic Vehicle Information Center (EVIC)/ cluster on vehicles equipped with the EVIC. Customer-Programmable Features" in "Understanding Your Instrument Panel" for further information. 4. Press and release the LOCK button on the RKE To program your RKE transmitters, perform the following: transmitter within 10 seconds. 1. Remove the Key Fob from the ignition (or change the NOTE: Your RKE transmitters can be unlinked to your ignition to OFF, for vehicles equipped with Keyless memory settings by following steps 1-4 above and pressEnter-N-Go). ing the UNLOCK button (instead of LOCK) on the RKE transmitter in Step 4. 2. Select desired memory profile (1) or (2). Memory Position Recall NOTE: If a memory profile has not already been set, refer to ЉProgramming The Memory FeatureЉ for instruc- NOTE: The vehicle must be in PARK to recall memory tions on how to set a memory profile. positions. If a recall is attempted when the vehicle is not in PARK, a message will be displayed in the Electronic Vehicle Information Center (EVIC). 3