2013 Dodge Durango Owner's Manual - Page 339

UNDERSTANDING YOUR INSTRUMENT PANEL 337 Vehicles Equipped With Keyless Enter-N-Go™ Fuel Economy 1. Without pressing the brake pedal, cycle the ignition to Press and release the UP/DOWN buttons until one of the following Fuel Economy Functions displays in the EVIC: the ON/RUN position (Do not start the engine.) 2. Fully depress the accelerator pedal, slowly, three times • Average Fuel Economy/Fuel Saver Mode within 10 seconds. • Distance To Empty 3. Cycle the ignition to the OFF/LOCK position. Average Fuel Economy/Fuel Saver Mode - If Equipped Vehicles Not Equipped With Keyless Enter-N-Go™ 1. Turn the ignition switch to the ON/RUN position (Do This feature shows the average fuel economy since the last reset. To reset the average fuel economy display, not start the engine.) press and release the SELECT button once while average 2. Fully depress the accelerator pedal, slowly, three times fuel economy is highlighted. Once reset, the history within 10 seconds. information will be erased, and the averaging will con3. Turn the ignition switch to the OFF/LOCK position. tinue from the last fuel average reading before the reset. NOTE: If the indicator message illuminates when you The FUEL SAVER MODE message will display above the start the vehicle, the oil change indicator system did not average fuel economy in the EVIC display. This message will appear whenever the Multi-Displacement System reset. If necessary, repeat this procedure. 4