2014 Dodge Challenger Owner Manual - Page 26

24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If equipped with Keyless Enter-N-Go™ (Passive Entry), 3. Test the feature while outside of the vehicle by pressing the LOCK/UNLOCK buttons on the RKE transrefer to "Keyless Enter-N-Go™" under "Things To Know mitter with the ignition switch in the OFF position and Before Starting Your Vehicle" for further information. the Key Fob removed. Remote Key Unlock, Driver Door/All Doors First This feature lets you program the system to unlock either 4. Repeat these steps if you want to return this feature to its previous setting. the driver's door or both doors on the first press of the UNLOCK button on the RKE transmitter. Refer to "Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)" in "Understanding Your Instrument Panel" for further information. NOTE: Pressing the LOCK button on the RKE transmitter while you are inside the vehicle will activate the Security Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound. Press the UN• When not using the EVIC, perform the following steps: LOCK button to deactivate the Security Alarm. 1. Press and hold the LOCK button on a programmed Flash Lights With Remote Key Lock RKE transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press and hold the UNLOCK This feature will cause the turn signal lights to flash when the doors are locked or unlocked with the RKE transmitbutton while still holding the LOCK button. ter. This feature can be turned on or turned off. Refer to 2. Release both buttons at the same time. "Electronic Vehicle Information Center (EVIC)/Personal