2014 Dodge Charger Owner Manual - Page 220

218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Select desired memory profile (1) or (2). The system will recall any stored settings for this profile. Wait for the system to complete the memory recall before Your RKE transmitters can be programmed to recall one continuing to Step 3. of two pre-programmed memory profiles by pressing the UNLOCK button on the RKE transmitter. 3. Once the profile has been recalled, press and release the SET (S) button on the memory switch, then press NOTE: Before programming your RKE transmitters you and release button (1) or (2) accordingly. "Memory must select the "Memory To FOB" feature through the Profile Set" (1 or 2) will display in the instrument Uconnect® system screen. Refer to "Customer- Programcluster on vehicles equipped with the EVIC. mable Features - Uconnect® Access 8.4 Settings " in "Understanding Your Instrument Panel" for further in- 4. Press and release the LOCK button on the RKE formation. transmitter within 10 seconds. Linking And Unlinking The Remote Keyless Entry Transmitter To Memory To program your RKE transmitters, perform the follow- NOTE: Your RKE transmitters can be unlinked to your ing: memory settings by following steps 1-4 above and press1. Remove the Key Fob from the ignition (or change the ing the UNLOCK button (instead of LOCK) on the RKE ignition to OFF, for vehicles equipped with Keyless transmitter in Step 4. Enter-N-Go™).