2014 Dodge Charger Owner Manual - Page 57

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 In the rear seat, move toward the center of the seat to Seat Belts In Passenger Seating Positions position the belt away from your neck. The seat belts in the passenger seating positions are equipped with Automatic Locking Retractors (ALR) Lap/Shoulder Belt Untwisting Procedure which are used to secure a child restraint system. For Use the following procedure to untwist a twisted lap/ additional information, refer to "Installing Child Reshoulder belt. straints Using The Vehicle Seat Belt" under the "Child 1. Position the latch plate as close as possible to the Restraints" section. The chart below defines the type of anchor point. feature for each seating position. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180 degrees to create a fold that begins immediately above the latch plate. Driver N/A ALR Center N/A ALR Passenger ALR ALR 2 3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of • N/A - Not Applicable the latch plate. First Row Second Row 4. Continue to slide the latch plate up until it clears the • ALR - Automatic Locking Retractor folded webbing.